Member Profile

Updated September 11, 2019

Posted September 11, 2019

Sergio Ignacio Molina Rubio

Full Professor

Materials and Nanotechnology for Innovation

Materials Science and Metallurgical Engineering

Articles Projects Contracts Patents Software Theses

Exportar a docx (solo UCA/VPN)

Last articles published

1.- SYNTHESIS OF SILVER NANOCOMPOSITES FOR STEREOLITHOGRAPHY: IN SITU FORMATION OF NANOPARTICLES

2022 - Polymers, Vol.14, Issue 6, pp -

Valencia, L.M.; Herrera, M.; de la Mata, M.; de León, A.S.; Delgado, F.J.; Molina, S.I.;

JCR Factor

4.329

JCR

Rank Cat.

18/88

Cat. JCR

POLYMER SCIENCE

Percentile JCR

80.114

SJR Factor

0.77

CiteScore

Rank Cat.

37/158

Cat. ASJC

POLYMERS AND PLASTICS

CiteScore

4.7

SNIP

1.2

DOI: 10.3390/polym14061168

2.- PRINTABLE GRAPHENE OXIDE NANOCOMPOSITES AS VERSATILE PLATFORMS FOR IMMOBILIZATION OF FUNCTIONAL BIOMOLECULES

2022 - Macromolecular Materials and Engineering, Vol.307, Issue 3, pp -

de León, A.S.; de la Mata, M.; Delgado, F.J.; Molina, S.I.;

JCR Factor

4.367

JCR

Rank Cat.

119/335

Cat. JCR

MATERIALS SCIENCE, MULTIDISCIPLINARY

Percentile JCR

81.25

SJR Factor

0.913

CiteScore

Rank Cat.

20/158

Cat. ASJC

POLYMERS AND PLASTICS

CiteScore

6.5

SNIP

0.902

DOI: 10.1002/mame.202100784

3.- CORK PHOTOCURABLE RESIN COMPOSITE FOR STEREOLITHOGRAPHY (SLA): INFLUENCE OF CORK PARTICLE SIZE ON MECHANICAL AND THERMAL PROPERTIES

2022 - Additive Manufacturing, Vol.51, Issue -, pp -

Romero-Ocaña, I.; Molina, S.I.;

JCR Factor

10.998

JCR

Rank Cat.

1/50

Cat. JCR

ENGINEERING, MANUFACTURING

Percentile JCR

SJR Factor

2.71

CiteScore

Rank Cat.

2/77

Cat. ASJC

ENGINEERING (MISCELLANEOUS)

CiteScore

11.6

SNIP

2.946

DOI: 10.1016/j.addma.2021.102586

4.- POLYMER COMPOSITES WITH CORK PARTICLES FUNCTIONALIZED BY SURFACE POLYMERIZATION FOR FUSED DEPOSITION MODELING

2022 - ACS Applied Polymer Materials, Vol.4, Issue 2, pp 1225-1233

De León, A.S.; Núñez-Gálvez, F.; Moreno-Sánchez, D.; Fernández-Delgado, N.; Molina, S.I.;

JCR Factor

4.089

JCR

Rank Cat.

22/88

Cat. JCR

POLYMER SCIENCE

Percentile JCR

75.568

SJR Factor

CiteScore

Rank Cat.

142/158

Cat. ASJC

POLYMERS AND PLASTICS

CiteScore

0.1

SNIP

3.213

DOI: 10.1021/acsapm.1c01632

5.- SYNTHESIS AND CHARACTERISATION OF ASA-PEEK COMPOSITES FOR FUSED FILAMENT FABRICATION

2022 - Polymers, Vol.14, Issue 3, pp -

Palacios-Ibáñez, B.; Relinque, J.J.; Moreno-Sánchez, D.; de León, A.S.; Delgado, F.J.; Escobar-Galindo, R.; Molina, S.I.;

JCR Factor

4.329

JCR

Rank Cat.

18/88

Cat. JCR

POLYMER SCIENCE

Percentile JCR

80.114

SJR Factor

0.77

CiteScore

Rank Cat.

37/158

Cat. ASJC

POLYMERS AND PLASTICS

CiteScore

4.7

SNIP

1.2

DOI: 10.3390/polym14030496

6.- STEM TOOLS FOR SEMICONDUCTOR CHARACTERIZATION: BEYOND HIGH-RESOLUTION IMAGING

2022 - Nanomaterials, Vol.12, Issue 3, pp -

de la Mata, M.; Molina, S.I.;

JCR Factor

5.076

JCR

Rank Cat.

51/107

Cat. JCR

NANOSCIENCE & NANOTECHNOLOGY

Percentile JCR

78.438

SJR Factor

0.919

CiteScore

Rank Cat.

58/279

Cat. ASJC

CHEMICAL ENGINEERING (ALL)

CiteScore

5.4

SNIP

1.129

DOI: 10.3390/nano12030337

7.- INDUCED DAMAGE DURING STEM-EELS ANALYSES ON ACRYLIC-BASED MATERIALS FOR STEREOLITHOGRAPHY

2022 - Polymer Degradation and Stability, Vol.203, Issue -, pp -

Valencia, L.M.; de la Mata, M.; Herrera, M.; Delgado, F.J.; Hernández-Saz, J.; Molina, S.I.;

JCR Factor

5.03

JCR

Rank Cat.

12/88

Cat. JCR

POLYMER SCIENCE

Percentile JCR

86.932

SJR Factor

0.925

CiteScore

Rank Cat.

13/158

Cat. ASJC

POLYMERS AND PLASTICS

CiteScore

SNIP

1.503

DOI: 10.1016/j.polymdegradstab.2022.110044

8.- SELF-ASSEMBLY OF CSPBBR₃PEROVSKITES IN MICROPATTERNED POLYMERIC SURFACES: TOWARD LUMINESCENT MATERIALS WITH SELF-CLEANING PROPERTIES

2022 - ACS applied materials & interfaces, Vol.14, Issue 17, pp 20023-20031

S. De León, A.; De La Mata, M.; Sanchez-Alarcon, I.R.; Abargues, R.; Molina, S.I.;

JCR Factor

9.229

JCR

Rank Cat.

21/107

Cat. JCR

NANOSCIENCE & NANOTECHNOLOGY

Percentile JCR

87.015

SJR Factor

2.535

CiteScore

Rank Cat.

28/455

Cat. ASJC

MATERIALS SCIENCE (ALL)

CiteScore

SNIP

1.463

DOI: 10.1021/acsami.2c01567

9.- ITACONIC-ACID-BASED SUSTAINABLE POLY(ESTER AMIDE) RESIN FOR STEREOLITHOGRAPHY

2022 - Macromolecules, Vol.55, Issue 8, pp 3087-3095

Vetri Buratti, V.; Sanz De Leon, A.; Maturi, M.; Sambri, L.; Molina, S.I.; Comes Franchini, M.;

JCR Factor

5.985

JCR

Rank Cat.

8/88

Cat. JCR

POLYMER SCIENCE

Percentile JCR

91.477

SJR Factor

1.994

CiteScore

Rank Cat.

9/185

Cat. ASJC

ORGANIC CHEMISTRY

CiteScore

SNIP

1.437

DOI: 10.1021/acs.macromol.1c02525

Articles published during the period 2017 - 2021.

1.- INVESTIGATION OF ALINASSB/GASB TANDEM CELLS – A FIRST STEP TOWARDS GASB-BASED MULTI-JUNCTION SOLAR CELLS

2021 - Solar Energy Materials and Solar Cells, Vol.219, Issue -, pp 110795(1)-110795(8)

Kret, J.; Tournet, J.; Parola, S.; Martínez, F.; Chemisana, D.; Morin, R.; Mata, M.d.l.; Fernández-Delgado, N.; Khan, A.A.; Molina, S.I.; Rouillard, Y.; Tournié, E.; Cuminal, Y.;

JCR Factor

7.267

JCR

Rank Cat.

28/160

Cat. JCR

PHYSICS, APPLIED

Percentile JCR

82.812

SJR Factor

1.839

CiteScore

Rank Cat.

7/123

Cat. ASJC

SURFACES, COATINGS AND FILMS

CiteScore

13.1

SNIP

1.662

DOI: 10.1016/j.solmat.2020.110795

2.- HYBRID HIERARCHICALLY STRUCTURED MATERIALS COMBINING BREATH FIGURES AND THERMAL DECOMPOSITION OF KAUCL₄

2021 - Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.624, Issue -, pp 126766(1)-126766(12)

de León, A.S.; de la Mata, M.; Molina, S.I.;

JCR Factor

4.539

JCR

Rank Cat.

64/162

Cat. JCR

CHEMISTRY, PHYSICAL

Percentile JCR

60.802

SJR Factor

0.762

CiteScore

Rank Cat.

33/169

Cat. ASJC

PHYSICAL AND THEORETICAL CHEMISTRY

CiteScore

6.5

SNIP

1.057

DOI: 10.1016/j.colsurfa.2021.126766

3.- ADDITIVE MANUFACTURING OF GOLD NANOSTRUCTURES USING NONLINEAR PHOTOREDUCTION UNDER CONTROLLED IONIC DIFFUSION

2021 - International Journal of Molecular Sciences, Vol.22, Issue 14, pp 7465(1)-7465(15)

Di Cianni, W.; de la Mata, M.; Delgado, F.J.; Desiderio, G.; Molina, S.I.; de León, A.S.; Giocondo, M.;

JCR Factor

5.923

JCR

Rank Cat.

67/298

Cat. JCR

BIOCHEMISTRY & MOLECULAR BIOLOGY

Percentile JCR

77.685

SJR Factor

1.455

CiteScore

Rank Cat.

12/69

Cat. ASJC

INORGANIC CHEMISTRY

CiteScore

SNIP

1.441

DOI: 10.3390/ijms22147465

4.- SOLUTION-PROCESSED NI-BASED NANOCOMPOSITE ELECTROCATALYSTS: AN APPROACH TO HIGHLY EFFICIENT ELECTROCHEMICAL WATER SPLITTING

2021 - ACS Applied Energy Materials, Vol.4, Issue 5, pp 5255-5264

Noguera-Gómez, J.; García-Tecedor, M.; Sánchez-Royo, J.F.; Valencia Liñán, L.M.; De La Mata, M.; Herrera-Collado, M.; Molina, S.I.; Abargues, R.; Giménez, S.;

JCR Factor

6.024

JCR

Rank Cat.

87/335

Cat. JCR

MATERIALS SCIENCE, MULTIDISCIPLINARY

Percentile JCR

74.179

SJR Factor

1.833

CiteScore

Rank Cat.

52/292

Cat. ASJC

MATERIALS CHEMISTRY

CiteScore

5.4

SNIP

0.931

DOI: 10.1021/acsaem.1c00776

5.- MODIFICATION OF THE MECHANICAL PROPERTIES OF CORE-SHELL LIQUID GALLIUM NANOPARTICLES BY THERMAL OXIDATION AT LOW TEMPERATURE

2021 - Particle and Particle Systems Characterization, Vol.38, Issue 10, pp 2100141(1)-2100141(8)

Catalán-Gómez, S.; Redondo-Cubero, A.; Morales, M.; de la Mata, M.; Molina, S.I.; Palomares, F.J.; Carnicero, A.; Pau, J.L.; Vázquez, L.;

JCR Factor

3.31

JCR

Rank Cat.

82/162

Cat. JCR

CHEMISTRY, PHYSICAL

Percentile JCR

49.691

SJR Factor

0.877

CiteScore

Rank Cat.

82/411

Cat. ASJC

CONDENSED MATTER PHYSICS

CiteScore

5.6

SNIP

0.547

DOI: 10.1002/ppsc.202100141

6.- STRUCTURAL CHARACTERIZATION OF AL₀.₃₇IN₀.₆₃N/ALN/P-SI (111) HETEROJUNCTIONS GROWN BY RF SPUTTERING FOR SOLAR CELL APPLICATIONS

2021 - Materials, Vol.14, Issue 9, pp 2236(1)-2236(8)

Núñez-Cascajero, A.; Naranjo, F.B.; De La Mata, M.; Molina, S.I.;

JCR Factor

3.623

JCR

Rank Cat.

17/80

Cat. JCR

METALLURGY & METALLURGICAL ENGINEERING

Percentile JCR

79.375

SJR Factor

0.682

CiteScore

Rank Cat.

135/411

Cat. ASJC

CONDENSED MATTER PHYSICS

CiteScore

4.2

SNIP

1.261

DOI: 10.3390/ma14092236

7.- INVESTIGATION ON Sb DISTRIBUTION FOR InSb/InAs SUB-MONOLAYER HETEROSTRUCTURE USING TEM TECHNIQUES

2020 - Nanotechnology, Vol.31, Issue 2, pp 025706[1]-025706[11]

Khan, A.A.; Herrera, M.; Fernández-Delgado, N.; Reyes, D.F.; Pizarro, J.; Repiso, E.; Krier, A.; Molina, S.I.;

JCR Factor

3.874

JCR

Rank Cat.

44/160

Cat. JCR

PHYSICS, APPLIED

Percentile JCR

72.812

SJR Factor

0.926

CiteScore

Rank Cat.

91/596

Cat. ASJC

MECHANICAL ENGINEERING

CiteScore

5.8

SNIP

0.802

DOI: 10.1088/1361-6528/ab4751

8.- EFFECT OF THE CAP LAYER GROWTH TEMPERATURE ON THE Sb DISTRIBUTION IN InAs/InSb/InAs SUB-MONOLAYER HETEROSTRUCTURES FOR MID-INFRARED DEVICES

2020 - Nanotechnology, Vol.31, Issue 10, pp 105702[1]-105702[10]

Khan, A.A.; Repiso, E.; Herrera, M.; Carrington, P.J.; De La Mata, M.; Pizarro, J.; Krier, A.; Molina, S.I.;

JCR Factor

3.874

JCR

Rank Cat.

44/160

Cat. JCR

PHYSICS, APPLIED

Percentile JCR

72.812

SJR Factor

0.926

CiteScore

Rank Cat.

91/596

Cat. ASJC

MECHANICAL ENGINEERING

CiteScore

5.8

SNIP

0.802

DOI: 10.1088/1361-6528/ab59f8

9.- DEVELOPMENT OF CARBON FIBER ACRYLONITRILE STYRENE ACRYLATE COMPOSITE FOR LARGE FORMAT ADDITIVE MANUFACTURING

2020 - Materials and Design, Vol.191, Issue 6:2020, pp 108577[1]-108577[10]

Sánchez, D.M.; de la Mata, M.; Delgado, F.J.; Casal, V.; Molina, S.I.;

JCR Factor

7.991

JCR

Rank Cat.

58/335

Cat. JCR

MATERIALS SCIENCE, MULTIDISCIPLINARY

Percentile JCR

82.836

SJR Factor

1.842

CiteScore

Rank Cat.

18/596

Cat. ASJC

MECHANICAL ENGINEERING

CiteScore

SNIP

2.264

DOI: 10.1016/j.matdes.2020.108577

10.- A SUGAR-BEET WASTE BASED THERMOPLASTIC AGRO-COMPOSITE AS SUBSTITUTE FOR RAW MATERIALS

2020 - Journal of Cleaner Production, Vol.257, Issue 6:2020, pp 120382[1]-120382[12]

Suffo, M.; Mata, M.d.l.; Molina, S.I.;

JCR Factor

9.297

JCR

Rank Cat.

3/44

Cat. JCR

GREEN & SUSTAINABLE SCIENCE & TECHNOLOGY

Percentile JCR

94.318

SJR Factor

1.937

CiteScore

Rank Cat.

7/440

Cat. ASJC

STRATEGY AND MANAGEMENT

CiteScore

13.1

SNIP

2.475

DOI: 10.1016/j.jclepro.2020.120382

11.- INFLUENCE OF THE DEGREE OF CURE IN THE BULK PROPERTIES OF GRAPHITE NANOPLATELETS NANOCOMPOSITES PRINTED VIA STEREOLITHOGRAPHY

2020 - Polymers, Vol.12, Issue 5, pp 1103[1]-1103[15]

De León, A.S.; Molina, S.I.;

JCR Factor

4.329

JCR

Rank Cat.

18/88

Cat. JCR

POLYMER SCIENCE

Percentile JCR

80.114

SJR Factor

0.77

CiteScore

Rank Cat.

37/158

Cat. ASJC

POLYMERS AND PLASTICS

CiteScore

4.7

SNIP

1.2

DOI: 10.3390/POLYM12051103

12.- HETEROMETALLIC TITANIUM-ORGANIC FRAMEWORKS BY METAL-INDUCED DYNAMIC TOPOLOGICAL TRANSFORMATIONS

2020 - Journal of the American Chemical Society, Vol.142, Issue 14, pp 6638-6648

Padial, N.M.; Lerma-Berlanga, B.; Almora-Barrios, N.; Castells-Gil, J.; Da Silva, I.; De La Mata, M.; Molina, S.I.; Hernández-Saz, J.; Platero-Prats, A.E.; Tatay, S.; Martĺ-Gastaldo, C.;

JCR Factor

15.419

JCR

Rank Cat.

15/179

Cat. JCR

CHEMISTRY, MULTIDISCIPLINARY

Percentile JCR

91.899

SJR Factor

7.115

CiteScore

Rank Cat.

7/415

Cat. ASJC

BIOCHEMISTRY

CiteScore

25.1

SNIP

2.605

DOI: 10.1021/jacs.0c00117

13.- AU-NIO: X NANOCOMPOSITE FOR HOT ELECTRON-ASSISTED PLASMONIC PHOTOCATALYSIS

2020 - Journal of Materials Chemistry C, Vol.8, Issue 29, pp 9885-9897

Fragua, D.; Noguera-Gómez, J.; Rodríguez-Canto, P.J.; Valencia, L.M.; de La Mata, M.; Herrera, M.; Molina, S.I.; Abargues, R.;

JCR Factor

7.393

JCR

Rank Cat.

25/160

Cat. JCR

PHYSICS, APPLIED

Percentile JCR

84.688

SJR Factor

1.899

CiteScore

Rank Cat.

15/292

Cat. ASJC

MATERIALS CHEMISTRY

CiteScore

11.1

SNIP

1.314

DOI: 10.1039/d0tc01507e

14.- SYNTHESIS AND CHARACTERISATION OF ACRYLIC RESIN-AL POWDER COMPOSITES SUITABLE FOR ADDITIVE MANUFACTURING

2020 - Polymers, Vol.12, Issue 8, pp 1642[1]-1642[17]

Relinque, J.J.; Romero-Ocaña, I.; Navas-Martos, F.J.; Delgado, F.J.; Domínguez, M.; Molina, S.I.;

JCR Factor

4.329

JCR

Rank Cat.

18/88

Cat. JCR

POLYMER SCIENCE

Percentile JCR

80.114

SJR Factor

0.77

CiteScore

Rank Cat.

37/158

Cat. ASJC

POLYMERS AND PLASTICS

CiteScore

4.7

SNIP

1.2

DOI: 10.3390/POLYM12081642

15.- ON BOARD ADDITIVE MANUFACTURING OF SPARE PARTS FOR THE NAVAL SECTOR

2020 - RINA, Royal Institution of Naval Architects - International Conference on Marine Design 2020, Papers, Vol.1, Issue 1:2020, pp 75-81

Moreno-Sánchez, D.; Rodríguez, J.D.; Domínguez-Calvo, A.; Molina, S.I.; Corrales-Estárico, E.; Casal, V.; Abad, F.;

JCR Factor

JCR

Rank Cat.

-/-

Cat. JCR

Percentile JCR

SJR Factor

CiteScore

Rank Cat.

-/-

Cat. ASJC

CiteScore

SNIP

DOI: -

16.- DESIGN OF A BIO-BASED DEVICE FOR MICRO TOTAL ANALYSIS COMBINING FUSED DEPOSITION MODELING AND LAYER-BY-LAYER TECHNOLOGIES

2020 - Macromolecular Materials and Engineering, Vol.305, Issue 11, pp 2000461[1]-2000461[9]

de León, A.S.; de Frutos, R.M.; Molina, S.I.;

JCR Factor

4.367

JCR

Rank Cat.

17/88

Cat. JCR

POLYMER SCIENCE

Percentile JCR

81.25

SJR Factor

0.913

CiteScore

Rank Cat.

20/158

Cat. ASJC

POLYMERS AND PLASTICS

CiteScore

6.5

SNIP

0.902

DOI: 10.1002/mame.202000461

17.- PURCELL ENHANCEMENT AND WAVELENGTH SHIFT OF EMITTED LIGHT BY CSPBI₃PEROVSKITE NANOCRYSTALS COUPLED TO HYPERBOLIC METAMATERIALS

2020 - ACS Photonics, Vol.7, Issue 11, pp 3152–3160

Adl, H.P.; Gorji, S.; Habil, M.K.; Suárez, I.; Chirvony, V.S.; Gualdrón-Reyes, A.F.; Mora-Seró, I.; Valencia, L.M.; De La Mata, M.; Hernández-Saz, J.; Molina, S.I.; Zapata-Rodríguez, C.J.; Martínez-Pastor, J.P.;

JCR Factor

7.529

JCR

Rank Cat.

10/99

Cat. JCR

OPTICS

Percentile JCR

90.404

SJR Factor

2.735

CiteScore

Rank Cat.

34/693

Cat. ASJC

ELECTRICAL AND ELECTRONIC ENGINEERING

CiteScore

13.2

SNIP

1.692

DOI: 10.1021/acsphotonics.0c01219

18.- OPTICAL PROPERTIES OF METAMORPHIC TYPE-I InAs₁₋ₓSbₓ/AlᵧIn₁₋ᵧAs QUANTUM WELLS GROWN ON GaAs FOR THE MID-INFRARED SPECTRAL RANGE

2019 - Journal Physics D: Applied Physics, Vol.52 , Issue 46 , pp 465102[1]-465102[11]

Repiso, E.; Broderick, C.A.; De La Mata, M.; Arkani, R.; Lu, Q.; Marshall, A.R.J.; Molina, S.I.; O'Reilly, E.P.; Carrington, P.J.; Krier, A.;

JCR Factor

3.169

JCR

Rank Cat.

44/154

Cat. JCR

PHYSICS, APPLIED

Percentile JCR

71.753

SJR Factor

0.899

CiteScore

Rank Cat.

7/43

Cat. ASJC

ACOUSTICS AND ULTRASONICS

CiteScore

5.3

SNIP

1.144

DOI: 10.1088/1361-6463/ab37cf

19.- INHIBITION OF LIGHT EMISSION FROM THE METASTABLE TETRAGONAL PHASE AT LOW TEMPERATURES IN ISLAND-LIKE FILMS OF LEAD IODIDE PEROVSKITES

2019 - Nanoscale, Vol.11 , Issue 46 , pp 22378-22386

Chuliá-Jordán, R.; Fernández-Delgado, N.; Juárez-Pérez, E.J.; Mora-Seró, I.; Herrera, M.; Molina, S.I.; Martínez-Pastor, J.P.;

JCR Factor

6.895

JCR

Rank Cat.

23/154

Cat. JCR

PHYSICS, APPLIED

Percentile JCR

85.39

SJR Factor

2.18

CiteScore

Rank Cat.

33/460

Cat. ASJC

GENERAL MATERIALS SCIENCE

CiteScore

11.3

SNIP

1.321

DOI: 10.1039/c9nr07543g

20.- INFLUENCE OF THE CROSSTALK ON THE INTENSITY OF HAADF-STEM IMAGES OF QUATERNARY SEMICONDUCTOR MATERIALS

2019 - Journal of Microscopy, Vol.273, Issue 1, pp 81-88

Baladés, N.; Herrera, M.; Sales, D.L.; Guerrero, M.P.; Guerrero, E.; Galindo, P.L.; Molina, S.I.;

JCR Factor

1.575

JCR

Rank Cat.

6/10

Cat. JCR

MICROSCOPY

Percentile JCR

SJR Factor

0.544

CiteScore

Rank Cat.

56/191

Cat. ASJC

PATHOLOGY AND FORENSIC MEDICINE

CiteScore

3.6

SNIP

0.712

DOI: 10.1111/jmi.12763

21.- MODIFIED QHAADF METHOD FOR ATOMIC COLUMN-BY-COLUMN COMPOSITIONAL QUANTIFICATION OF SEMICONDUCTOR HETEROSTRUCTURES

2019 - Journal of Materials Science, Vol.54, Issue 4, pp 3230-3241

Khan, A.A.; Herrera, M.; Pizarro, J.; Galindo, P.L.; Carrington, P.J.; Fujita, H.; Krier, A.; Molina, S.I.;

JCR Factor

3.553

JCR

Rank Cat.

108/314

Cat. JCR

MATERIALS SCIENCE, MULTIDISCIPLINARY

Percentile JCR

65.764

SJR Factor

0.798

CiteScore

Rank Cat.

60/585

Cat. ASJC

MECHANICAL ENGINEERING

CiteScore

6.2

SNIP

1.079

DOI: 10.1007/s10853-018-3073-y

22.- ROOM-TEMPERATURE OPERATION OF LOW-VOLTAGE, NON-VOLATILE, COMPOUND-SEMICONDUCTOR MEMORY CELLS

2019 - Scientific Reports, Vol.9, Issue 1, pp 8950[1]-8950[8]

Tizno, O.; Marshall, A.R.J.; Fernández-Delgado, N.; Herrera, M.; Molina, S.I.; Hayne, M.;

JCR Factor

3.998

JCR

Rank Cat.

17/71

Cat. JCR

MULTIDISCIPLINARY SCIENCES

Percentile JCR

76.761

SJR Factor

1.341

CiteScore

Rank Cat.

8/111

Cat. ASJC

MULTIDISCIPLINARY

CiteScore

7.2

SNIP

1.365

DOI: 10.1038/s41598-019-45370-1

23.- MATERIALS WITH ENHANCED ADHESIVE PROPERTIES BASED ON ACRYLONITRILE-BUTADIENE-STYRENE (ABS)/THERMOPLASTIC POLYURETHANE (TPU) BLENDS FOR FUSED FILAMENT FABRICATION (FFF)

2019 - Materials and Design, Vol.182, Issue -, pp 108044[1]-108044[11]

de León, A.S.; Domínguez-Calvo, A.; Molina, S.I.;

JCR Factor

6.289

JCR

Rank Cat.

59/314

Cat. JCR

MATERIALS SCIENCE, MULTIDISCIPLINARY

Percentile JCR

81.369

SJR Factor

1.806

CiteScore

Rank Cat.

13/585

Cat. ASJC

MECHANICAL ENGINEERING

CiteScore

SNIP

2.303

DOI: 10.1016/j.matdes.2019.108044

24.- EFFECT OF THE THERMAL ANNEALING AND THE NOMINAL COMPOSITION IN THE ELEMENTAL DISTRIBUTION OF InₓAl₁₋ₓAsᵧSb₁₋ᵧ FOR TRIPLE JUNCTION SOLAR CELLS

2019 - Journal of Alloys and Compounds, Vol.-, Issue -, pp 1021-1027

Hernández-Saz, J.; Herrera, M.; Pizarro, J.; Gonzalez, M.; Abell, J.; Walters, R.; Galindo, P.L.; Duguay, S.; Molina, S.I.;

JCR Factor

4.65

JCR

Rank Cat.

8/79

Cat. JCR

METALLURGY & METALLURGICAL ENGINEERING

Percentile JCR

90.506

SJR Factor

1.055

CiteScore

Rank Cat.

37/585

Cat. ASJC

MECHANICAL ENGINEERING

CiteScore

7.6

SNIP

1.468

DOI: 10.1016/j.jallcom.2019.04.119

25.- DEVELOPMENT OF SURFACE-COATED POLYLACTIC ACID/POLYHYDROXYALKANOATE (PLA/PHA) NANOCOMPOSITES

2019 - Polymers, Vol.11, Issue 3, pp 400[1]-400[12]

Relinque, J.J.; de León, A.S.; Hernández-Saz, J.; García-Romero, M.G.; Navas-Martos, F.J.; Morales-Cid, G.; Molina, S.I.;

JCR Factor

3.426

JCR

Rank Cat.

16/89

Cat. JCR

POLYMER SCIENCE

Percentile JCR

82.584

SJR Factor

0.704

CiteScore

Rank Cat.

39/154

Cat. ASJC

POLYMERS AND PLASTICS

CiteScore

3.7

SNIP

1.15

DOI: 10.3390/polym11030400

26.- STRUCTURAL CHARACTERIZATION OF BULK AND NANOPARTICLE LEAD HALIDE PEROVSKITE THIN FILMS BY (S)TEM TECHNIQUES

2019 - Nanotechnology, Vol.30, Issue 13, pp 135701[1]-135701[13]

Fernández-Delgado, N.; Herrera, M.; Delgado, F.J.; Tavabi, A.H.; Luysberg, M.; Dunin-Borkowski, R.E.; Juárez-Pérez, E.J.; Hames, B.C.; Mora-Sero, I.; Suárez, I.; Martínez-Pastor, J.P.; Molina, S.I.;

JCR Factor

3.551

JCR

Rank Cat.

40/154

Cat. JCR

PHYSICS, APPLIED

Percentile JCR

74.351

SJR Factor

1.026

CiteScore

Rank Cat.

62/585

Cat. ASJC

MECHANICAL ENGINEERING

CiteScore

6.1

SNIP

0.868

DOI: 10.1088/1361-6528/aafc85

27.- DESIGN AND DEVELOPMENT OF A PARAMETRIZABLE ELECTRIC GUITAR THROUGH ADDITIVE MANUFACTURING [DISEÑO Y DESARROLLO DE UNA GUITARRA ELÉCTRICA PARAMETRIZABLE MEDIANTE PROCESOS DE FABRICACIÓN ADITIVA]

2019 - Dyna (Spain), Vol.94, Issue 1, pp 26-31

Moreno-Nieto, D.; De-La-Herrán, G.; Bienvenido, R.; Molina, S.;

JCR Factor

0.781

JCR

Rank Cat.

76/91

Cat. JCR

ENGINEERING, MULTIDISCIPLINARY

Percentile JCR

17.033

SJR Factor

0.163

CiteScore

Rank Cat.

188/299

Cat. ASJC

GENERAL ENGINEERING

CiteScore

0.8

SNIP

0.227

DOI: 10.6036/8672

28.- HIGH SPATIAL RESOLUTION MAPPING OF LOCALIZED SURFACE PLASMON RESONANCES IN SINGLE GALLIUM NANOPARTICLES

2019 - Small, Vol.-, Issue -, pp 1902920

de la Mata, M.; Catalán-Gómez, S.; Nucciarell,i F.; Pau, J.L.; Molina, S.I.;

JCR Factor

11.459

JCR

Rank Cat.

10/154

Cat. JCR

PHYSICS, APPLIED

Percentile JCR

93.831

SJR Factor

3.717

CiteScore

Rank Cat.

3/100

Cat. ASJC

BIOMATERIALS

CiteScore

15.7

SNIP

1.695

DOI: 10.1002/smll.201902920

29.- LARGE-FORMAT FUSED DEPOSITION ADDITIVE MANUFACTURING: A REVIEW

2019 - Rapid Prototyping Journal, Vol.-, Issue -, pp -

Moreno Nieto, D.; Molina, S.I.;

JCR Factor

3.099

JCR

Rank Cat.

31/130

Cat. JCR

ENGINEERING, MECHANICAL

Percentile JCR

76.538

SJR Factor

0.841

CiteScore

Rank Cat.

64/340

Cat. ASJC

INDUSTRIAL AND MANUFACTURING ENGINEERING

CiteScore

4.4

SNIP

1.328

DOI: 10.1108/RPJ-05-2018-0126

30.- EXPLORING THE CAPABILITY OF HAADF-STEM TECHNIQUES TO CHARACTERIZE GRAPHENE DISTRIBUTION IN NANOCOMPOSITES BY SIMULATIONS

2018 - Journal of Nanomaterials, Vol.2018, Issue -, pp 4906746[1]-4906746[12]

Baladés, N.; Herrera, M.; Sales, D.L.; Raya, A.M.; Hernández-Garrido, J.C.; López-Haro, M.; Molina, S.I.;

JCR Factor

2.233

JCR

Rank Cat.

150/293

Cat. JCR

MATERIALS SCIENCE, MULTIDISCIPLINARY

Percentile JCR

48.976

SJR Factor

0.383

CiteScore

Rank Cat.

180/440

Cat. ASJC

GENERAL MATERIALS SCIENCE

CiteScore

SNIP

0.616

DOI: 10.1155/2018/4906746

31.- QUALITY IMPROVEMENT OF AlInN/p-Si HETEROJUNCTIONS WITH ALN BUFFER LAYER DEPOSITED BY RF-SPUTTERING

2018 - Journal of Alloys and Compounds, Vol.769, Issue -, pp 824-830

Núñez-Cascajero, A.; Valdueza-Felip, S.; Blasco, R.; de la Mata, M.; Molina, S.I.; González-Herráez, M.; Monroy, E.; Naranjo, F.B.;

JCR Factor

4.175

JCR

Rank Cat.

6/76

Cat. JCR

METALLURGY & METALLURGICAL ENGINEERING

Percentile JCR

92.763

SJR Factor

1.065

CiteScore

Rank Cat.

37/587

Cat. ASJC

MECHANICAL ENGINEERING

CiteScore

6.7

SNIP

1.412

DOI: 10.1016/j.jallcom.2018.08.059

32.- INFLUENCE OF THE ALN INTERLAYER THICKNESS ON THE PHOTOVOLTAIC PROPERTIES OF IN-RICH AlInN ON Si HETEROJUNCTIONS DEPOSITED BY RF SPUTTERING

2018 - AIP Advances, Vol.8, Issue 11, pp 115315[1],115315[7]

Valdueza-Felip, S.; Núñez-Cascajero, A.; Blasco, R.; Montero, D.; Grenet, L.; De La Mata, M.; Fernández, S.; Rodríguez-De-Marcos, L.; Molina, S.I.; Olea, J.; Naranjo, F.B.;

JCR Factor

1.579

JCR

Rank Cat.

95/148

Cat. JCR

PHYSICS, APPLIED

Percentile JCR

36.149

SJR Factor

0.504

CiteScore

Rank Cat.

95/217

Cat. ASJC

GENERAL PHYSICS AND ASTRONOMY

CiteScore

2.5

SNIP

0.747

DOI: 10.1063/1.5041924

33.- INFLUENCE OF THE ADDITIVATION OF GRAPHENE-LIKE MATERIALS ON THE PROPERTIES OF POLYAMIDE FOR POWDER BED FUSION

2018 - Progress in Additive Manufacturing, Vol.3, Issue 4, pp 233-244

Relinque, J.J.; García-Romero, M.G.; Hernández-Saz, J.; Navas, J.; Gil-Mena, J.; Sales, D.L.; Morales-Cid, G.; Aguilera, D.; Periñan, A.; Lasagni, F.; Molina, S.I.;

JCR Factor

JCR

Rank Cat.

-/-

Cat. JCR

Percentile JCR

SJR Factor

CiteScore

Rank Cat.

-/-

Cat. ASJC

CiteScore

SNIP

DOI: 10.1007/s40964-018-0056-0

34.- LARGE-FORMAT POLYMERIC PELLET-BASED ADDITIVE MANUFACTURING FOR THE NAVAL INDUSTRY

2018 - Additive Manufacturing, Vol.23, Issue -, pp 79-85

Moreno, Nieto, D.; Casal, López, V.; Molina, S.I.;

JCR Factor

7.173

JCR

Rank Cat.

1/49

Cat. JCR

ENGINEERING, MANUFACTURING

Percentile JCR

98.98

SJR Factor

2.591

CiteScore

Rank Cat.

4/56

Cat. ASJC

ENGINEERING (MISCELLANEOUS)

CiteScore

6.8

SNIP

3.223

DOI: 10.1016/j.addma.2018.07.012

35.- STRUCTURAL AND CHEMICAL CHARACTERIZATION OF CdSe-ZnS CORE-SHELL QUANTUM DOTS

2018 - Applied Surface Science, Vol.457, Issue -, pp 93-97

Fernández-Delgado, N.; Herrera, M.; Tavabi, A.H.; Luysberg, M.; Dunin-Borkowski, R.E.; Rodriguez-Cantó, P.J.; Abargues, R.; Martínez-Pastor, J.P.; Molina, S.I.;

JCR Factor

5.155

JCR

Rank Cat.

1/20

Cat. JCR

MATERIALS SCIENCE, COATINGS & FILMS

Percentile JCR

97.5

SJR Factor

1.115

CiteScore

Rank Cat.

27/398

Cat. ASJC

CONDENSED MATTER PHYSICS

CiteScore

7.5

SNIP

1.352

DOI: 10.1016/j.apsusc.2018.06.149

36.- INFLUENCE OF THE GROWTH TEMPERATURE ON THE COMPOSITION DISTRIBUTION AT SUB-NM SCALE OF InAlAsSb FOR SOLAR CELLS

2018 - Journal of Alloys and Compounds, Vol.763, Issue -, pp 1005-1011

Hernández-Saz, J.; Herrera, M.; Pizarro, J.; Galindo, P.L.; Gonzalez, M.; Abell, J.; Walters, R.J.; Molina, S.I.; Duguay, S.;

JCR Factor

4.175

JCR

Rank Cat.

6/76

Cat. JCR

METALLURGY & METALLURGICAL ENGINEERING

Percentile JCR

92.763

SJR Factor

1.065

CiteScore

Rank Cat.

37/587

Cat. ASJC

MECHANICAL ENGINEERING

CiteScore

6.7

SNIP

1.412

DOI: 10.1016/j.jallcom.2018.05.333

37.- GEOMETRIC-STRUCTURAL STUDY OF THE ACCELERATED DEGRADATION OF MOLD CAVITIES FOR HDPE INJECTION

2018 - Journal of Failure Analysis and Prevention, Vol.18, Issue 1, pp 55-65

Suffo, M.; Delgado, F.J.; Molina, S.I.;

JCR Factor

JCR

Rank Cat.

-/-

Cat. JCR

Percentile JCR

SJR Factor

0.237

CiteScore

Rank Cat.

104/158

Cat. ASJC

SAFETY, RISK, RELIABILITY AND QUALITY

CiteScore

0.9

SNIP

0.617

DOI: 10.1007/s11668-017-0378-0

38.- HAADF-STEM FOR THE ANALYSIS OF CORE–SHELL QUANTUM DOTS

2018 - Journal of Materials Science, Vol.53, Issue 21, pp 15226-15236

Fernández-Delgado, N.; Herrera, M.; Pizarro, J.; Galindo, P.; Molina, S.I.;

JCR Factor

3.442

JCR

Rank Cat.

82/293

Cat. JCR

MATERIALS SCIENCE, MULTIDISCIPLINARY

Percentile JCR

72.184

SJR Factor

0.823

CiteScore

Rank Cat.

86/587

Cat. ASJC

MECHANICAL ENGINEERING

CiteScore

4.9

SNIP

1.096

DOI: 10.1007/s10853-018-2694-5

39.- GAUSSIAN KERNEL DENSITY FUNCTIONS FOR COMPOSITIONAL QUANTIFICATION IN ATOM PROBE TOMOGRAPHY

2018 - Materials Characterization, Vol.139, Issue -, pp 63-69

Hernández-Saz, J.; Pizarro, J.; Herrera, M.; Molina, S.I.; Galindo, P.L.;

JCR Factor

3.22

JCR

Rank Cat.

4/33

Cat. JCR

MATERIALS SCIENCE, CHARACTERIZATION & TESTING

Percentile JCR

89.394

SJR Factor

1.295

CiteScore

Rank Cat.

85/587

Cat. ASJC

MECHANICAL ENGINEERING

CiteScore

4.9

SNIP

1.628

DOI: 10.1016/j.matchar.2018.02.033

40.- ANALYSIS OF Bi DISTRIBUTION IN EPITAXIAL GaAsBi BY ABERRATION-CORRECTED HAADF-STEM

2018 - Nanoscale Research Letters, Vol.13, Issue -, pp 125-133

Balades, N.; Sales, D. L.; Herrera, M.; Tan, C. H.; Liu, Y.; Richards, R. D.; Molina, S. I.

JCR Factor

3.159

JCR

Rank Cat.

41/148

Cat. JCR

PHYSICS, APPLIED

Percentile JCR

72.635

SJR Factor

0.782

CiteScore

Rank Cat.

75/398

Cat. ASJC

CONDENSED MATTER PHYSICS

CiteScore

5.2

SNIP

1.065

DOI: 10.1186/s11671-018-2530-5

41.- STRUCTURAL AND COMPOSITIONAL ANALYSIS OF CORE/SHELL QDs BY TRANSMISSION ELECTRON

2017 - Microscopy and Microanalysis, Vol.23, Issue 1, pp 1768-1769

Fernández-Delgado, N.; Herrera-Collado, M.; Pizarro, J.; Galindo, P.; Rodriguez-cantó, P.; Abargues, R.; Martínez-pastor, J.; Molina, S.I.;

JCR Factor

2.124

JCR

Rank Cat.

3/10

Cat. JCR

MICROSCOPY

Percentile JCR

SJR Factor

0.292

CiteScore

Rank Cat.

78/123

Cat. ASJC

INSTRUMENTATION

CiteScore

1.2

SNIP

0.274

DOI: 10.1017/S1431927617009503

42.- STRUCTURAL CHARACTERIZATION OF InAlAsSb/InGaAs/InP HETEROSTRUCTURES FOR SOLAR CELLS

2017 - Applied Surface Science, Vol.395, Issue -, pp 98-104

Baladés, N.; Herrera, M.; Sales, D.L.; Delgado, F.J.; Hernández-Maldonado, D.; Ramasse, Q.M.; Pizarro, J.; Galindo, P.; González, M.; Abell, J.; Tomasulo, S.; Walters, J.R.; Molina, S.I.;

JCR Factor

4.439

JCR

Rank Cat.

1/19

Cat. JCR

MATERIALS SCIENCE, COATINGS & FILMS

Percentile JCR

97.368

SJR Factor

1.093

CiteScore

Rank Cat.

11/117

Cat. ASJC

SURFACES, COATINGS AND FILMS

CiteScore

6.7

SNIP

1.328

DOI: 10.1016/j.apsusc.2016.07.094

43.- EFFECT OF ANNEALING ON THE COMPOSITIONAL MODULATION OF InAlAsSb

2017 - Applied Surface Science, Vol.395, Issue -, pp 105-109

Baladés, N.; Sales, D.L.; Herrera, M.; Delgado, F.J.; González, M.; Clark, K.; Pinsunkajana, P.; Hoven, N.; Hubbard, S.; Tomasulo, S.; Walters, J.R.; Molina, S.I.;

JCR Factor

4.439

JCR

Rank Cat.

1/19

Cat. JCR

MATERIALS SCIENCE, COATINGS & FILMS

Percentile JCR

97.368

SJR Factor

1.093

CiteScore

Rank Cat.

11/117

Cat. ASJC

SURFACES, COATINGS AND FILMS

CiteScore

6.7

SNIP

1.328

DOI: 10.1016/j.apsusc.2016.06.091

44.- EFFECT OF AN IN-SITU THERMAL ANNEALING ON THE STRUCTURAL PROPERTIES OF SELF-ASSEMBLED GaSb/GaAs QUANTUM DOTS

2017 - Applied Surface Science, Vol.395, Issue -, pp 136-139

Fernández-Delgado, N.; Herrera, M.; Chisholm, M.F.; Kamarudin, M.A.; Zhuang, Q.D.; Hayne, M.; Molina, S.I.;

JCR Factor

4.439

JCR

Rank Cat.

1/19

Cat. JCR

MATERIALS SCIENCE, COATINGS & FILMS

Percentile JCR

97.368

SJR Factor

1.093

CiteScore

Rank Cat.

11/117

Cat. ASJC

SURFACES, COATINGS AND FILMS

CiteScore

6.7

SNIP

1.328

DOI: 10.1016/j.apsusc.2016.04.131

45.- SIZE EFFECT AND SCALING POWER-LAW FOR SUPERELASTICITY IN SHAPE-MEMORY ALLOYS AT THE NANOSCALE

2017 - Nature Nanotechnology, Vol.12, Issue 8, pp 790-796

Gómez-Cortés, J.F.; Nó, M.L.; López-Ferrenõ, I.; Hernández-Saz, J.; Molina, S.I.; Chuvilin, A.; San Juan, J.M.;

JCR Factor

37.49

JCR

Rank Cat.

4/285

Cat. JCR

MATERIALS SCIENCE, MULTIDISCIPLINARY

Percentile JCR

98.772

SJR Factor

20.612

CiteScore

Rank Cat.

1/666

Cat. ASJC

ELECTRICAL AND ELECTRONIC ENGINEERING

CiteScore

65.1

SNIP

7.911

DOI: 10.1038/nnano.2017.91

Projects active during the period 2017 - 2021.

1.- VALORIZACIÓN DE MATERIALES BASADOS EN MEZCLAS Y COMPUESTOS POLIMÉRICOS PARA FABRICACIÓN ADITIVA: MATERIALES Y PROTOTIPOS (3DBLEND-MP)

Ref. PDC2021-10, Program: Plan Nacional I+D+i
Organization: MINISTERIO DE CIENCIA E INNOVACIÓN Start date: 2021-12-01 End Date: 2023-11-30
Grant: 96.600,00€ Participants: 6
Role: Investigador Principal

2.- CONVENIO DE COLABORACIÓN ENTRE LA CONSEJERÍA DE AGRICULTURA, GANADERÍA, PESCA Y DESARROLLO SOSTENIBLE DE LA JUNTA DE ANDALUCÍA Y LA UCA PARA EL DESARROLLO DEL PROYECTO “DESARROLLO DE APLICACIONES INDUSTRIALES DE MATERIALES BASADOS EN CORCHO”

Ref. ADICORK-20-21, Program: Plan Andaluz de Investigación
Organization: CONSEJERÍA DE AGRICULTURA, GANADERÍA, PESCA Y DESARROLLO SOSTENIBLE - JUNTA DE ANDALUCÍA Start date: 2020-07-01 End Date: 2022-06-30
Grant: 230.000,00€ Participants: 6
Role: Investigador Principal

3.- MEJORA EN LA EFICIENCIA DE RECURSOS Y EN SOSTENIBILIDAD MEDIANTE LA IMPLEMENTACIÓN DE METODOLOGÍAS DE FABRICACIÓN ADITIVA PARA EL MANTENIMIENTO DE INSTALACIONES EN LA INDUSTRIA QUÍMICA.

Ref. FCTA2020-10, Program: Programas Varios
Organization: FUNDACIÓN CAMPUS TECNOLÓGICO DE ALGECIRAS Start date: 2020-07-01 End Date: 2021-06-30
Grant: 6.085,48€ Participants: 4
Role: Participante

4.- DESARROLLO DE MATERIALES FUNCIONALES DE BASE POLIMÉRICA PARA APLICACIONES INDUSTRIALES EN FABRICACIÓN ADITIVA (3DMATFUN)

Ref. FEDER-UCA18-103710, Program: Plan Andaluz de Investigación
Organization: CONSEJERÍA DE ECONOMÍA Y CONOCIMIENTO. JUNTA DE ANDALUCÍA Start date: 2020-04-01 End Date: 2022-03-31
Grant: 92.050,00€ Participants: 5
Role: Investigador Principal

5.- NANOSCOPÍA ELECTRÓNICA PARA EL DESARROLLO DE MATERIALES COMPUESTOS Y NANOESTRUCTURADOS CON APLICACIONES EN FOTÓNICA Y SENSÓRICA

Ref. FEDER-UCA18-106586, Program: Plan Andaluz de Investigación
Organization: CONSEJERÍA DE ECONOMÍA Y CONOCIMIENTO. JUNTA DE ANDALUCÍA Start date: 2020-04-01 End Date: 2023-03-31
Grant: 115.000,00€ Participants: 4
Role: Participante

6.- DESARROLLO DE NUEVOS MATERIALES A PARTIR DE SUBPRODUCTOS MARINOS PARA SU USO EN IMPRESIÓN 3D EN EL SECTOR NAVAL

Ref. CEIJ19-007, Program: Programas Varios
Organization: FUNDACIÓN CEI·MAR Start date: 2019-11-22 End Date: 2020-11-23
Grant: 4.000,00€ Participants: 5
Role: Participante

7.- HOSPITAL 3D: AYUDA A NIÑOS CON FRACTURAS Y PROBLEMAS ORTOPÉDICOS

Ref. PR-257, Program: Plan Nacional I+D+i
Organization: FUNDACIÓN ESPAÑOLA PARA LA CIENCIA Y LA TECNOLOGÍA (FECYT) Start date: 2019-10-01 End Date: 2021-09-30
Grant: 3.219,60€ Participants: 8
Role: Investigador Principal

8.- DISPOSITIVOS ACTIVOS FOTÓNICOS BASADOS EN NANOESTRUCTURAS SEMICONDUCTORAS TIPO PEROVSKITA Y METAMATERIALES HIPERBÓLICOS: CARACTERIZACIÓN Y FABRICACIÓN ADITIVA.

Ref. TEC2017-86102-C2-2-R, Program: Plan Nacional I+D+i
Organization: MINISTERIO DE ECONOMÍA Y COMPETITIVIDAD. PLAN NACIONAL I+D+I Start date: 2018-01-01 End Date: 2020-12-31
Grant: 163.350,00€ Participants: 6
Role: Investigador Principal

9.- POSTGRADUATE RESEARCH ON DILUTE METAMORPHIC NANOSTRUCTURES AND METAMATERIALS IN SEMICONDUCTOR PHOTONICS.

Ref. 641899, Program: Programas Europeos
Organization: UNIÓN EUROPEA Start date: 2015-01-01 End Date: 2018-12-31
Grant: 226.272,00€ Participants: 5
Role: Investigador Principal

10.- DISPOSITIVOS OPTOELECTRÓNICOS Y FOTÓNICOS BASADOS EN NANOMATERIALES AVANZADOS: NANOCARACTERIZACIÓN Y NANOPROCESADO.

Ref. TEC2014-53727-C2-2-R, Program: Plan Nacional I+D+i
Organization: MINISTERIO DE ECONOMÍA Y COMPETITIVIDAD. PLAN NACIONAL I+D+I Start date: 2015-01-01 End Date: 2017-12-31
Grant: 208.120,00€ Participants: 5
Role: Investigador Principal

Contracts active during the period 2017 - 2021.

1.- CHARACTERIZATION OF POLYMERIC MATERIALS

Ref. OT2021/023, Company: VGO Capital Partners LLP
Start date: 2021-03-08 End Date: 2021-04-18
Grant: 5.445,00€ Participants: 4
Role: Investigador Principal

2.- 3DFLOW: DESARROLLO DE SISTEMAS DE VENTILACIÓN Y ASPIRACIÓN DE LOS BUQUES MEDIANTE FABRICACIÓN ADITIVA

Ref. OT2020/140, Company: NAVANTIA, S.A.
Start date: 2020-12-01 End Date: 2022-06-30
Grant: 42.350,00€ Participants: 4
Role: Investigador Principal

3.- ENSAYOS MECÁNICOS DE PROTOTIPOS DE SENSORES DE APARCAMIENTO.

Ref. OT2020/120, Company: MATTEO GATTO
Start date: 2020-11-23 End Date: 2020-12-23
Grant: 242,00€ Participants: 4
Role: Investigador Principal

4.- DESARROLLO DE APLICACIONES INDUSTRIALES DE MATERIALES BASADOS EN CORCHO (ADICORK)

Ref. OT2020/146, Company: JUNTA DE ANDALUCIA
Start date: 2020-07-01 End Date: 2022-06-30
Grant: 230.000,02€ Participants: 4
Role: Investigador Principal

5.- ASISTENCIA PARA REALIZACIÓN DE PRUEBAS DE IMPRESIÓN 3D A BORDO DEL BUQUE UCADIZ DE PROBETAS Y PROTOTIPOS ELABORADOS EN EL PROYECTO DE I+D+I 3DONBOARD

Ref. OT2020/026, Company: NAVANTIA, S.A.
Start date: 2020-02-01 End Date: 2020-03-31
Grant: 5.916,03€ Participants: 4
Role: Investigador Principal

6.- SEGUNDA PROPUESTA Y EJECUCION DE UN PROGRAMA DE CONTROL DE CALIDAD SOBRE 9 PROTOTIPOS AGLOMERADOS DE CORCHO INTRINSECOS DEL SECTOR DEL PACKAGING

Ref. OT2019/134, Company: HEREDEROS DE TORRENT MIRANDA S.L.
Start date: 2019-10-25 End Date: 2019-11-18
Grant: 6.806,00€ Participants: 4
Role: Participante

7.- PROPUESTA Y EJECUCION DE UN PROGRAMA DE CONTROL DE CALIDAD SOBRE 5 PROTOTIPOS AGLOMERADOS DE CORCHO INTRINSECOS DEL SECTOR DEL PACKAGING

Ref. OT2019/069, Company: HEREDEROS DE TORRENT MIRANDA S.L.
Start date: 2019-05-15 End Date: 2019-06-28
Grant: 6.171,00€ Participants: 4
Role: Investigador Principal

8.- REALIZACIÓN DE MODELOS 3D MEDIANTE ESTEREOLITOGRAFÍA

Ref. OT2018/079, Company: COMPAÑÍA DE TAPONES IRRELLENABLES, S.A.
Start date: 2018-04-21 End Date: 2018-04-30
Grant: 557,21€ Participants: 4
Role: Investigador Principal

9.- ASISTENCIA PARA POSTPROCESADO DE PIEZAS ELABORADAS MEDIANTE FABRICACIÓN ADITIVA EN EL PROYECTO DE I+D+I ADIBUQUE

Ref. OT2019/002, Company: NAVANTIA, S.A.
Start date: 2018-01-11 End Date: 2018-12-15
Grant: 3.025,00€ Participants: 4
Role: Investigador Principal

10.- DESARROLLO Y VALIDACIÓN DE REPUESTOS FABRICADOS EN IMPRESORAS 3D A BORDO DE BUQUES

Ref. OT2018/121, Company: NAVANTIA, S.A.
Start date: 2018-01-10 End Date: 2019-09-30
Grant: 72.600,00€ Participants: 4
Role: Investigador Principal

11.- CARACTERIZACION ESTRUCTURAL MEDIANTE TEM DE MUESTRAS CONSTITUTIDAS POR HETEROEPITAXIAS SEMICONDUCTORAS

Ref. OT2018/072, Company: UNIVERSIDAD DE LANCASTER
Start date: 2018-01-05 End Date: 2018-12-31
Grant: 3.420,26€ Participants: 4
Role: Investigador Principal

12.- FABRICACIÓN ADITIVIA APLICADA A ELEMENTOS DE BUQUES EN FASE DE CONSTRUCCIÓN CON MATERIALES COMPUESTOS POLIMÉRICOS MEDIANTE MODELADO POR DEPOSICIÓN FUNDIDA

Ref. OT2018/014, Company: NAVANTIA, S.A.
Start date: 2018-01-01 End Date: 2018-12-31
Grant: 42.350,00€ Participants: 4
Role: Investigador Principal

13.- FABRICACIÓN ADITIVA DE PROTOTIPOS DISEÑO 3D Y POST PROCESADO DE TAPONES RELLENABLES

Ref. OT2017/034, Company: COMPAÑÍA DE TAPONES IRRELLENABLES, S.A.
Start date: 2017-02-07 End Date: 2017-03-31
Grant: 1.911,46€ Participants: 4
Role: Investigador Principal

14.- SELECCIÓN, ADAPTACIÓN DE MATERIALES E IMPLEMENTACIÓN DE TECNOLOGÍA DE FABRICACIÓN ADITIVA CON OBJETO DE APLICAR DICHA TECNOLOGÍA Y MATERIALES A LA FABRICACIÓN DE CABINAS PARA HABILITACIÓN DE BUQUES

Ref. OT2016/064, Company: NAVANTIA, S.A.
Start date: 2016-04-01 End Date: 2017-03-31
Grant: 72.600,00€ Participants: 4
Role: Investigador Principal

15.- EFI-PACK: FABRICACIÓN DE ENVASES PARA EL SECTOR DE LA ALIMENTACIÓN A PARTIR DE COMPOSITES DE XPS Y DE PET CON PROPIEDADES MEJORADAS MEDIANTE TERMOCONFORMADO DE ALTA EFICIENCIA

Ref. OT2015/121, Company: SMART MATERIALS 3D PRINTING S.L.
Start date: 2015-09-01 End Date: 2017-08-31
Grant: 48.400,00€ Participants: 4
Role: Investigador Principal

Patents registered

1.- MATERIAL COMPUESTO FOTOCURABLE CON BIOCARBÓN DE CORCHO PARA ESTEREOLITOGRAFÍA

Authors: MOLINA RUBIO, SERGIO IGNACIO; ROMERO OCAÑA, ISMAEL
Ref. P201831162 Application date: 2022-11-08
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERIA METALURGICA

2.- TABURETE CILÍNDRICO CON PATRÓN EXTERIOR ONDULADO

Authors: MOLINA RUBIO, SERGIO IGNACIO; BURGOS PINTOS, PEDRO
Ref. P201831162 Application date: 2022-09-19
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERIA METALURGICA

3.- LÁMPARA DE MESA CON ZONAS MÓVILES PARA CONTROL DE LA LUZ INSPIRADO EN EL DESCORCHO

4.- MESA ANÉMONA

5.- MATERIAL COMPUESTO FOTOCURABLE DE PAJA TRITURADA PROCEDENTE DEL CULTIVO DE CEREALES PARA SU USO EN ESTEREOLITOGRAFIA Y PROCEDIMIENTO DE OBTENCIÓN

Authors: MOLINA RUBIO, SERGIO IGNACIO; ROMERO OCAÑA, ISMAEL
Ref. P201831162 Application date: 2021-07-15
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERIA METALURGICA

6.- MEZCLAS POLIMÉRICAS BASADAS EN LA DISPERSIÓN DE POLÍMEROS DE LA FAMILIA PAEK EN ASA, ABS Y DERIVADOS CON COMPORTAMIENTO IGNÍFUGO Y RESISTENCIA MECÁNICA MEJORADOS

Authors: MOLINA RUBIO, SERGIO IGNACIO; RELINQUE MADROÑAL, JOSE JAVIER
Ref. P201831162 Application date: 2021-05-10
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERIA METALURGICA

7.- PANTALLA PARA LÁMPARA CON TEXTURA DE OLAS Y ORIFICIOS.

Authors: MOLINA RUBIO, SERGIO IGNACIO; MORENO NIETO, FRANCISCO DANIEL
Ref. P201831162 Application date: 2021-02-05
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

8.- RESINA FOTOCURABLE COMPUESTA DE CORCHO PARA ESTEREOLITOGRAFÍA.

Authors: MOLINA RUBIO, SERGIO IGNACIO; ROMERO OCAÑA, ISMAEL
Ref. P201831162 Application date: 2020-12-23
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

9.- MATERIAL TERMOPLÁSTICO DE BASE ABS PARA IMPRESIÓN 3D MEDIANTE EXTRUSIÓN DE FILAMENTOS Y GRANZA FUNDIDA.

Authors: MOLINA RUBIO, SERGIO IGNACIO; SANZ DE LEON, ALBERTO
Ref. P201831162 Application date: 2019-04-08
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

10.- MATERIAL COMPUESTO PARA SU USO EN LA INDUSTRIA DEL PROCESADO DE TERMOPLÁSTICOS.

Authors: MOLINA RUBIO, SERGIO IGNACIO
Ref. P201831162 Application date: 2018-05-24
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

11.- SANITARIO PARA ANIMALES DOMÉSTICOS. (Modelo de utilidad).

Authors: MOLINA RUBIO, SERGIO INGNACIO
Ref. P201831162 Application date: 2016-12-30
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

12.- ELEMENTO REDIRECCIONADOR DEL FLUJO DE AIRE PARA APARATOS DE AIRE ACONDICIONADO TIPO SPLIT.

Authors: MOLINA RUBIO, SERGIO IGNACIO
Ref. P201831162 Application date: 2016-07-11
Licenced: SI Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

13.- MÉTODO PARA LA PREPARACIÓN DE NANOCOMPUESTOS BASADOS EN RESINAS FOTOSENSIBLES.

Authors: RELINQUE MADROÑAL, JOSÉ JAVIER; HERNÁNDEZ SAZ, JESÚS; FERNÁNDEZ DELGADO, NATALIA; MOLINA RUBIO, SERGIO IGNACIO; HERRERA COLLADO, MIRIAM
Ref. P201831162 Application date: 2016-01-27
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

14.- SANITARIO PARA ANIMALES DOMÉSTICOS.

Authors: MENACHO CARRASCO, ALBERTO; MOLINA RUBIO, SERGIO IGNACIO; MENACHO RUBIO, JUAN
Ref. P201831162 Application date: 2015-08-03
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

15.- EQUIPO PARA FABRICACIÓN DE LÁMINAS DELGADAS MEDIANTE EL PROCESO DE RECUBRIMIENTO POR ROTACIÓN.

Authors: SALES LÉRIDA, DAVID; MOLINA RUBIO, SERGIO IGNACIO; SIMÓN GARCÍA, FRANCISCO
Ref. P201831162 Application date: 2014-10-30
Licenced: NO Role: Autor
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

16.- PROCEDIMIENTO DE ELABORACIÓN DE MATERIALES DE PARTIDA PARA FABRICACIÓN ADITIVA.

Authors: MOLINA RUBIO, SERGIO IGNACIO; HERNÁNDEZ SAZ, JESÚS; RELINQUE MADROÑAL, JOSÉ JAVIER; SALES LÉRIDA, DAVID; DELGADO GONZÁLEZ, FRANCISCO JAVIER; GARCÍA ROMERO, MANUEL GERMAN
Ref. P201831162 Application date: 2014-05-16
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

17.- PROCEDIMIENTO PARA LA MEJORA DEL CONTRASTE ÓPTICO EN LA ELABORACIÓN DE GRABADOS A NANOESCALA.

Authors: HERNÁNDEZ SAZ, JESÚS; MOLINA RUBIO, SERGIO IGNACIO; HERRERA COLLADO, MIRIAM; DELGADO GONZÁLEZ, FRANCISCO JAVIER
Ref. P201831162 Application date: 2012-04-24
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

18.- PROCEDIMIENTO PARA DETERMINAR LA DISTRIBUCIÓN EN 3D DE GRAFENO Y MATERIALES RELACIONADOS EN MATERIALES COMPUESTOS.

Authors: MOLINA RUBIO, SERGIO IGNACIO
Ref. P201831162 Application date: 2012-03-02
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

19.- MÉTODO PARA FABRICAR NANOAGUJAS EN ZONAS DE INTERÉS LOCALIZADAS EN EL INTERIOR DE MUESTRAS SÓLIDAS A ESCALA NANOMÉTRICA.

Authors: HERRERA COLLADO, MIRIAM; HERNÁNDEZ SAZ, JESÚS; MOLINA RUBIO, SERGIO IGNACIO
Ref. P201831162 Application date: 2010-07-12
Licenced: NO Role: Solicitante
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

20.- SISTEMA PARA LA CARBURIZACIÓN DE SILICIO.

Authors: MORALES SANCHEZ, FRANCISCO MIGUEL; MOLINA RUBIO, SERGIO IGNACIO
Ref. P201831162 Application date: 2000-06-15
Licenced: NO Role: Autor
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

Software developed

1.- Transferencia de know How (KH2021 - MATERSIA)

Authors: MOLINA RUBIO, SERGIO IGNACIO
File No.. CA-AN.04-2021 Application date: 2021-12-13
Role: Responsable
Area: CIENCIA DE LOS MATERIALES E INGENIERIA METALURGICA

2.- Software de análisis de imágenes de microscopía electrónica en modo HAADF

Authors: GALINDO RIAÑO, PEDRO LUIS; MOLINA RUBIO, SERGIO IGNACIO; PIZARRO JUNQUERA, JOAQUÍN;
File No.. CA-00047-2012 Application date: 2012-02-06
Role: Autor
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

3.- Software de determinación de máximos en imágenes ruidosas

Authors: GALINDO RIAÑO, PEDRO LUIS; MOLINA RUBIO, SERGIO IGNACIO; PIZARRO JUNQUERA, JOAQUÍN;
File No.. CA-00046-2012 Application date: 2012-02-06
Role: Autor
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

Theses

1.- DESARROLLO DE MATERIALES BASADOS EN ACRILONITRILO ESTIRENO ACRILATO PARA TECNOLOGÍAS DE FABRICACIÓN ADITIVA POR EXTRUSIÓN DE MATERIAL EN EL SECTOR NAVAL

Directors: MOLINA RUBIO, SERGIO IGNACIO; BLANCO FERNANDEZ, MARIA DEL PILAR
PhD Student: MORENO SÁNCHEZ, DANIEL Lecture Date: 21/07/2021
Calification: International Mention: No
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

2.- NANOSCALE CHARACTERIZATION OF INSB/INAS NOVEL FUNCTIONAL SEMICONDUCTOR NANOSTRUCTURES FOR LEDS

Directors: HERRERA COLLADO, MIRIAM; MOLINA RUBIO, SERGIO
PhD Student: ALAM KHAN, ATIF Lecture Date: 17/01/2020
Calification: SOBRESALIENTE/CUM LAUDE UNANIMIDAD International Mention: Yes
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

3.- SÍNTESIS Y CARACTERIZACIÓN DE NANOMATERIALES PARA FABRICACIÓN ADITIVA

Directors: MOLINA RUBIO, SERGIO IGNACIO
PhD Student: RELINQUE MAYORAL, JOSÉ JAVIER Lecture Date: 08/11/2019
Calification: SOBRESALIENTE/CUM LAUDE UNANIMIDAD International Mention: No
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

4.- NANO-ANÁLISIS ESTRUCTURAL Y ESPECTROSCÓPICO DE NANOESTRUCTURAS METÁLICAS PLASMÓNICAS

Directors: MOLINA RUBIO, SERGIO IGNACIO
PhD Student: DÍAZ EGEA, JOSÉ CARLOS Lecture Date: 26/07/2016
Calification: SOBRESALIENTE/CUM LAUDE UNANIMIDAD International Mention: No
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

5.- ANÁLISIS TOMOGRÁFICO A NANOESCALA DE MATERIALES NANOESTRUCTURADOS PARA DISPOSITIVOS FOTOVOLTAICOS

Directors: MOLINA RUBIO, SERGIO IGNACIO; HERRERA COLLADO, MIRIAM
PhD Student: HERNÁNDEZ SAZ, JESÚS Lecture Date: 08/07/2016
Calification: SOBRESALIENTE UNANIMIDAD International Mention: Yes
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

6.- DESARROLLO DE METODOLOGÍAS DE ANÁLISIS BASADAS EN MICROSCOPÍA ELECTRÓNICA DE ABERRACIÓN CORREGIDA Y SU APLICACIÓN A NANOESTRUCTURAS SEMICONDUCTORAS III-V

Directors: HERRERA COLLADO, MIRIAM; MOLINA RUBIO, SERGIO IGNACIO
PhD Student: HERNÁNDEZ MALDONADO, DAVID Lecture Date: 29/07/2013
Calification: SOBRESALIENTE/CUM LAUDE UNANIMIDAD International Mention: Yes
Area: CIENCIA DE LOS MATERIALES E INGENIERÍA METALÚRGICA

Overview

Cookies Policy

Cookies customization

UniversidaddeCádiz

UniversidaddeCádiz

Member Profile

Last articles published

Articles published during the period 2017 - 2021.

Projects active during the period 2017 - 2021.

Contracts active during the period 2017 - 2021.

Patents registered

Software developed

Theses